| Title |
File |
Additional Data on the Tonick Range of Decoders.
Useful information on specifications, connections and ratings. Also how to identify the commons on solenoid outputs |
|
CIC Programmer / Tester Instructions
User instructions for prog/tester |
|
CIC1+ Programmer / Tester Instructions
User instructions for prog/tester |
|
Data on Remote Control.
Information on how to fit the remote control receiver into an RM-1 and the key codes on the hand-held radio to operate it. |
|
Data on Tonick 2 Wire Decoders
This includes example distances at different water pressures and with 2 different solenoids |
|
Efficient Use of Water. Configuring a Tonick RM-1 Controller.
What information about the site is needed to set op the RM-1 for optimum irrigation performance and water efficiency. |
|
Fault Finding Irrigation Field Wiring
How to find electrical and station faults in field wiring using simple test equipment. |
|
How to Derive an Efficient RM-1 watering Order.
When a minimum overall watering time is required, care is needed in specifying the watering order in the RM-1. This application note provides a guide on how this may be done. |
|
How to Manage Multiple Active Decoders on the Two-Wire TW/WM Series.
Avoiding problems and pitfalls in turning on multiple ‘Watermation style’ decoders on the same cable. |
|
How to Replace a TW2 with a Tonick Demi-Rain.
This application note describes a way of replacing a Watermation TW-2 with a Tonick Demi-Rain controller, achieving better performance at a much lower cost. |
|
Program the Tonick RM-1 from a Microsoft Excel Spreadsheet.
Tonick now offer a service whereby the configuration can be submitted on a Microsoft Excel Spreadsheet. This is processed and then downloaded to the RM-1. The controller can then be shipped ready configured. |
|
Rainmaker RM-1 Controller. New Features in Version 1.5x Software.
Describes new features in the RM-1 software. |
|
Remote control the TW-3 Irrigation Controller for less than £100
Using a low cost PAYG mobile phone as a receiver, the Tonick TW3 irrigation controller may be remotely controlled from any other mobile phone.
|
|
Specifying a Remote Controlled RM-1.
What is needed to allow the RM-1 to be controlled from the course using a hand-held radio. |
|
The Rainmaker RM-1 Instruction Manual
How to install and operate the Tonick wall mounted controller. |
|
The Sizing of Cables for Decoder Systems
This application note seeks to help define the required copper core size of cables to be used with decoder systems. |
|
The Tonick Translator Instruction Manual
How to install and operate the Translator line-signalling unit |
|
Toro Programmer / Tester Instructions
User instructions for prog/tester |
|
Translator with CIC 1+ Decoders
Using translator with CIC 1+ Decoder |
|
TW-3 Controller
Brochure on the TW-3 controller |
|
TW-3 Controller Instruction Manual
Includes new information on remote control using a mobile phone and details of the latest version of TW3/GEM which simultaneously activates up to 4 Bailoy/Toro Gemini decoders. |
|
Updating the RM-1 Firmware.
These instructions tell you how to change the Rainmaker RM-1 firmware by exchanging the program memory integrated circuit inside the RM-1. |
|
VI~AQUA - WATER TREATMENT FOR NATURAL TURFGRASS ENHANCEMENT
Effective, chemical-free treatment to preserve and improve water resources |
|
Vi~Aqua Water Treatment. Technical File.
A collection of independent scientific papers supporting the claims made for Vi~Aqua |
|
Vi~Aqua Water Treatment/Zeta Potential
A tutorial on the uses of changing the Zeta Potential in coloidal suspensions, as used by Vi~Aqua |
|
WM Programmer / Tester Instructions
User instructions for prog/tester |
|
WR Programmer / Tester Instructions
User instructions for prog/tester |
|
